The Bymat stainless steel weld cleaner 1140 RS is the high power machine from the Brushline range of high frequency weld cleaning machines. This new range of machines uses High Frequency Technology to speed up the cleaning process, rather than the harsh chemicals used by some competitors machines. This machine has a 100% duty cycle with no machine down time.
Cleaning
The Bymat will easily remove the oxide film from the weld quickly, cleanly and safely. Simply dip the pad or brush into the Electrolytic cleaning solution and wipe across the weld. The oxide film instantly disappears and the welded area is simultaneously protected against corrosion (passivated) in one operation. In comparison with cleaning and pickling with acids, this process is significantly faster and less expensive due to zero waiting time. The chemicals used for the process contains no hazardous substances and so is significantly safer than conventional chemical cleaning methods.
Electropolishing
The grey edge marks (heat-affected zones) close to the welded seams are caused by the material changes during the welding process. These can be removed without any problem using the “Polish” setting on the machine. It is possible to polish stainless steel to a high gloss finish thus returning the original lustre of the material.
Dark marking of electrically – conductive surfaces
Dark marking onto Stainless Steel can be performed using a template/stencil designed to your specific requirements.
The Bymat will permanently mark components deep black, easily, rapidly and inexpensively. Once marked the text or design cannot be removed by cleaning products or solvents and will not wear off. Company logos, graphics, trademarks, serial numbers, identification numbers, scales, and texts can be permanently marked. Our high-performance electrolyte is PH neutral and requires no neutralization.
Light marking of electrically – conductive surfaces
Light marking uses the same template/stencil as for dark marking. Using a different Electrolyte we achieve a light marking effect similar to engraving. Material is removed from the component leaving your design/text permanently etched into the surface. This is suitable for materials such as black steels and aluminium for example.
| Voltage |
|
|---|
Delivery Costs
Free delivery for orders over £75.00 (ex-VAT) to mainland UK. This does not include any additional charges.*
£7.50 delivery courier costs for orders under £75.00 (ex-VAT) to mainland UK.
A £10.00 additional handling and delivery charge for all gas deliveries.*
A £15.00 additional charge for any deliveries to postcodes that are within the Inner London Congestion Zone.
Any large deliveries that require a pallet will be subject to additional charges depending on postcode location. Please check using the shipping calculator on the basket page.
* Excludes Northern Ireland, Scottish Highlands, Channel Islands, and Isle of Man. £17.50 carriage applies to all orders to these areas.
Delivery Information
We aim to send all orders placed before 4 pm on the same day, on a tracked next-day courier service. This excludes any orders that require a pallet.
Dependent upon sufficient stock.
In case of insufficient stock, we aim to complete all orders within 7 - 10 working days. Some items come from Europe and will take approx. 5 days to arrive at our warehouse. If an item is going to be longer than this, for whatever reason, you will be notified and a replacement will be suggested. If this is not suitable then a refund will be given.
Collection from our branches is available. Please contact your local branch beforehand to ensure that they have the stock that you ordered.
Other delivery options are available. Please contact us for any requirements.
Gas Deliveries
Deliveries of gas must be made via our vans and will be scheduled with our loads. This is usually next day, but please contact us if you have a specific delivery time in mind.
* Gas deliveries are available to a limited area. Please check the eligibility of shipping by using the shipping calculator in the basket menu.
Related products
